PLEASE MEASURE YOURSELF BEFORE ORDERING. OUR SIZES DIFFER FROM ANY OTHER COMPANY. REPAIRS CAN NOT BE MADE. 

Sizing-

From bottom of strap excluding case.

• Extra Small 53-60 inches
• Small 58-65 inches
• Medium 64-71 inches
• Large 70-75 inches

If ordering as a gift here are some recommendations for size, however, not always 100% correct.

• Extra Small 5'8" or less than 150 lbs 
• Small - under 5'10" or less than 200 lbs. 
• Medium - under 6'3" or less than 260 lbs. 
• Large - over 6'3" or more than 325 lbs.

How to Measure-

Take a piece of webbing, rope, or string over your shoulder. Bring two ends together at your hip where you would like the strap to attach to the radio case.  Take a tape measure and record the overall length in inches.  Select the appropriate size from our sizing chart.  For best results, please ensure you are standing straight when taking the measurements.

Product Description-

• 1 ½” Hand Cut American Full Grain Leather
• Stitched edges 

• Top quality scissor buckles to attach to a radio case

• 1 belt end keeper

• 2 horizontal mic clips

• 1 Mic clip with cord keeper included

• Anti-sway strap (matching hardware)

• Our Universal Radio case or Radio Holster may be added with matching hardware and leather. It fits 99% of current radios on the market including but not limited to: Motorola APX series, Motorola HT series, Motorola CP series, Motorola DTR, EF Johnson, ICOM, VERTEX, Viking Radios, King Radios, and many more.

WE DO NOT RECOMMEND WEARING YOUR RADIO STRAP OVER YOUR TURNOUT COAT. THIS CREATES AN ENTANGLEMENT HAZARD AND IS HARSH ON YOUR RADIO AND STRAP. 

For proper use with turnout gear place your coat over the strap with your radio hanging over bunker pants. Your strap should be placed where your coat will shed water off of your radio, but yet you can still use knob functions. Pull the collar mic out of your coat through the neck. By doing this you will protect your strap and most importantly your communication device.

Post Fire Decontamination Recommendations

All of our leather products are sealed to prevent the absorption of large contaminants and particulates. If your equipment enters the IDLH, we recommend washing off the large particulates with copious amounts of water and a soft bristle brush. For a more in depth decontamination, use a mild detergent (Joy, Dawn, or car soap) along with water and a soft bristle brush.  Once clean, let air dry out of direct sunlight. Our equipment should not be placed in an extractor or dryer. These recommendations are based off of UL Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures. The study may be found at https://ulfirefightersafety.org/docs/FentEtAl_JOEH2017.pdf

Stitched Leather Fire Helmet Chin Strap-

Fully Involved Leatherworks Custom First Responder Gear is handmade with a limited lifetime warranty for Firefighters and Medics. Our 5/8” wide leather chin straps exceed what you normally get from the other guys. They are made from 9/10 oz American Zebu Hides. These hides are brought to our shop and then hand cut. Each piece of leather for our straps are hand dyed using Oil Dye. This Oil dye will not come off, and helps ensure that your product will not crack, fade, or lose color over time. Thick enough to take the abuse from the job of fire and EMS, but supple enough to be comfortable. Our handcrafted products feature stitched edges, tough hardware, limited lifetime warranty, and the best customer service in the industry. Each product is sealed to prevent bleeding onto uniforms and the ability to be washable for decon. Being a Firefighter Owned and Operated business, we test our products to the max before putting them on your back. Our products are made to last, and will ride with you through many years, if not your entire career.

Product Description-

• 5/8” wide 9/10 oz. leather

• Stitched edges

• 29” overall length when extended

• NFPA Approved postman slide buckle for quick tightening and loosening of your helmet

• Oversized Side Squeeze connection buckle for quick helmet release with a gloved hand

• Add Trial-Sized Loc-Tite to screws to ensure they won’t come out over time.

Color Choices Include-

• Black Leather, Red Stitching, and Nickel Hardware
• Black Leather, Black Stitching, and Black Hardware
• Rustic Brown Leather, White Stitching, and Brass Hardware
• Rustic Brown Leather, Black Stitching, and Black Hardware
• Red Leather, Black Stitching, and Brass Hardware
• Pink Leather, Black Stitching, and Nickel Hardware
• Blue Leather, Black Stitching, and Nickel Hardware
• Green Leather, Black Stitching, and Nickel Hardware
• Tailboard Tan Leather, Black Stitching, and Nickel Hardware

Helmet Options-

• Attaches to Cairns N6A, Cairns N5A, OR Phenix TL2 with no adapters

• Can attach to other helmet options with the removal of a screw and installation of adapter

In Stock Products ship same or next business day.

Post Fire Decontamination Recommendations

All of our leather products are sealed to prevent the absorption of large contaminants and particulates. If your equipment enters the IDLH we recommend washing off the large particulates with copious amounts of water and a soft bristle brush. For a more in depth decontamination use a mild detergent (Joy, Dawn, or car soap) along with water and a soft bristle brush. Once clean let air dry out of direct sunlight. Our equipment should not be placed in an extractor or dryer. These recommendations are based off of UL Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures. The study may be found at https://ulfirefightersafety.org/docs/FentEtAl_JOEH2017.pdf

SCBA Mask Shield-
Fully Involved Leatherworks Scott SCBA Mask Shield is the perfect solution for protecting your SCBA Mask from scratches and abrasion when not in use. Many of our customers prefer to keep these on their masks during shifts, when attached to SCBA, on alarm/vehicle accident calls where they must wear their SCBA, but not necessarily using the face piece, etc.

Our SCBA Mask Shields are designed from 6+ oz. full grain USA leather, hand cut, sewn, and assembled. We offer these products customized as well.

Product Description-

• In Stock and ready to ship.
• Designed for Scott AV2000, AV3000, and C5 Facepieces.
• Top quality 9+ oz. leather.
• Bungee placed to contain the shield to your mask when traveling.
• Two sided snap for quick bungee release, but secure when traveling.

Color Choices Include-

• Black Leather, Red Stitching, and Nickel Hardware
• Black Leather, Black Stitching, and Black Hardware
• Rustic Brown Leather, White Stitching, and Brass Hardware
• Rustic Brown Leather, Black Stitching, and Black Hardware
• Red Leather, Black Stitching, and Brass Hardware
• Pink Leather, Black Stitching, and Nickel Hardware
• Blue Leather, Black Stitching, and Nickel Hardware
• Green Leather, Black Stitching, and Nickel Hardware
• Tailboard Tan Leather, Black Stitching, and Nickel Hardware

Add Extended Training Bungee to your order for use while wearing the Mask Shield for blackout simulation. This bungee is 34" long and will retain the Mask Shield to your mask and head while wearing full PPE.

In Stock Products ship the same or next business day.

Post Fire Decontamination Recommendations

All of our leather products are sealed to prevent the absorption of large contaminants and particulates. If your equipment enters the IDLH we recommend washing off the large particulates with copious amounts of water and a soft bristle brush. For a more in depth decontamination use a mild detergent (Joy, Dawn, or car soap) along with water and a soft bristle brush. Once clean let air dry out of direct sunlight. Our equipment should not be placed in an extractor or dryer. These recommendations are based off of UL Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures. The study may be found at

https://ulfirefightersafety.org/docs/FentEtAl_JOEH2017.pdf