Mobile Mark Inc

Itasca,  IL 
United States
  • Booth: 1129

Antennas for wireless applications from 30 MHz to 7.2 GHz.

Mobile Mark designs and manufactures antenna solutions for Exploration, Smart Grid and Smart Meter.

Styles include infrastructure, mobile and device antennas

Frequency coverage from 30 MHz – 7.2 GHz, including Cellular 5G & 4G LTE, CBRS, ISM, WiFi up to 6e, GNSS, ISM, VHF & UHF.

Products are manufactured in the US & UK. 

Custom designs available.

Brands: Comtelco, Mobile Mark, Inc. Mobile Mark ( Europe ) Ltd., Luxul, 6-2-6,


  • LTMWG944
    4x 5G Sub-6 Cellular LTE, Up to 4x WiFi 6E, and Up to 1x GNSS
    WiFi 6E Up to 7.125 GHz
    Cellular LTE Coverage 600 - 6000 MHz
    Configure with Less WiFi or More GNSS

  • This Dual Carrier MIMO Multi-Band Antenna Global has SUB-6 5G LTE, WiFi 6E & GNSS

    It responds to the growing interest in antenna solutions for fleet management that cover the entire sub-6 frequency band from 600-6000 MHz. These “6-2-6” antennas make it possible to connect to any of the current or planned cellular frequency bands that reside at or below 6 GHz. This Series contains up to 10-cables and provides a good match for the dual-carrier modems that contain two pairs of LTE MIMO elements, one pair for each carrier.  These fleet management systems offer Cellular carrier back-up.  There are Up to 4x WiFi 6E elements that provide faster throughput for advanced WiFi processors. Furthermore, it covers all Cellular bands, worldwide.  In the US, this includes the new CBRS (Citizens Broadband Radio Service) at 3.55-3.7 GHz and Band 71 at 617-698 MHz. Measuring 5.5″ (140 mm) in diameter with a low profile of 2.38″ (60.4 mm), it comes in black or white. In addition, it takes up significantly less space than multiple antennas. The LTMWG 900 Series always contains 4x Sub-6 5G Cellular for dual-carrier coverage, but it can also be configured with fewer WiFi elements. The model numbers will change as follows: LTMWG944, LTMWG943, LTMWG942, LTMWG941, LTMWG940

  • RM-WB1
    Single Element, 5G Sub-6 Cellular
    Comes as a Surface, Mag or Direct Mount
    Heavy Duty; Compact Profile

  • Mobile Mark’s RM-WB1 Wideband antenna covers the entire 5G Sub-6 frequency band from 600-6000 MHz. The “6-2-6” antenna solutions make it possible to connect to any of the current or planned cellular frequency bands that reside at or below 6 GHz. This antenna contains a single element covering 617-960 & 1710-6000 MHz. This includes the new Band 71 at 617-698 MHz, CBRS at 3550-3700 MHz and LAA at 5-6 GHz. The RM-WB1 can also be used for NB-IoT and LTE-M applications where the specific frequency band may vary from project to project. The antenna measures 3.1” (79cm) tall by 1.7” (43cm) in diameter. It provides 3 dBi gain and can handle up to 10 watts of power. The RM-WB1 can be used for fixed site installation or for mobile installations. The RM mounts to a 5/8” (16mm) diameter hole and is available with either a cable pigtail termination or a Direct “N” connector termination. The same electrical and mechanical specs apply to both configurations. The antenna is also available as a mag-mount with the model number MGRM-WB1.
  • Y42700WB-2X
    Dual Log Periodic, 600 – 6000 MHz
    High Gain, Wide Beam width
    Heavy Duty Directional Coverage...

  • The Y42700WB-2X log periodic antennas combine two Y42700WB antennas with a bracket. This creates a 2x MIMO installation. Its rugged constructions makes it ideal for Industrial networks operating on CBRS Private LTE. Each antenna is independently fed by a separate cable but mounts together. The two cable feeds have the ability to attach to a MIMO modem. In addition, this provides coverage on any applications within the 600 to 6000 MHz bandwidth. Also known as one of our 6 to 6 Antennas. The performance characteristics of the Y42700WB-2X (Wide Band 2x MIMO) Antenna are as follows:

    High Performance: The log periodic design provides excellent wide band performance. from 600 MHz to 6 GHz.

    Rugged and Weatherproof: Our hybrid radome provides weather protection and it is made from a UV inhibited ABS material.

    Lightweight and Durable: This antenna is easily installed by one person. It can withstands 125 MPH winds. In addition, the heavy duty mounting plate is made extruded aluminum.

    Termination Option: Type A: 12″ Teflon pigtail with N-Female connector

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".

For questions regarding the DISTRIBUTECH conference program please contact: 
Gabriella Cecere,
For questions regarding DISTRIBUTECH exhibitor services please contact your exhibitor services team: