Ampacimon Inc  

Ampacimon’s GridVisor overhead line sensor is a more than just a Fault Indicator - it can detect faults both electrically and mechanically, send alerts and diagnosis information directly to your SCADA and DMS - decreasing SAIDI and CAIDI and prevent future failures.

Features:

- Faster fault response time : fault indication, rapid pinpointing, fault root cause

- Mechanical detection : ice accretion, strong winds, vegetation impact, excessive heat and sag

- Optimized grid operations : phase balancing, DER integration, condition-based maintenance

- Advanced digitization strategies : SCADA integration, predictive maintenance

For more information please see our website here: https://www.ampacimon.com/en/grid-visor

Get in touch to find out more: https://www.ampacimon.com/en/contact

The MS Plus Portable equipment is the ideal solution for the measurement of partial discharges in timely or temporary monitoring services. It contains the measuring electronics inside a suitcase with IP65 degree of protection for use in outdoor installations. Inside it has space to transport all the necessary accessories to be able to realize the capture of partial discharges and make a complete diagnosis. It allows to complete a measure of partial discharges in less than 30 minutes being able to extend the time to a temporary monitoring of several days.

This equipment allows the capture of partial discharge and voltage reference signals to obtain the frequency and phase offset parameters. It has functions to configure the armed with synchronization, or by synchronization input signal by optical fiber or by forced internal synchronization. The system allows the transmission of raw partial discharges and voltage reference signals to be transmitted to a central control PC (CAS). The control of the equipment is done from the server PC through an Ethernet network connection through any of the three available ports (1 electrical and 2 optical).

The MS Plus Portable measuring instrument is designed to operate in a dedicated network with an available bandwidth of 100 Mbps. It can be installed in series with other measurement systems to perform monitoring with multiple measurement points.

Features:

- Removes electrical noise without sacrificing signal band,

- Automatically determines partial discharges location,

- Differentiates each partial discharge producing source, and

- Assess the criticality of each defect in relation to the degradation of electrical insulation.

For more information, please see our website here: https://www.ampacimon.com/en/other-pd-measurement-systems 

Get in touch to find out more: https://www.ampacimon.com/en/contact

The measurement instrument MS Pico is the ideal solution for the measurement of partial discharges in services for spot monitoring in agile and simple way. It includes a last generation recorder with the capacity to capture partial discharges and perform a complete diagnosis. It allows to realise a measurement of partial discharges in less than 3 minutes.

This equipment allows the capture of signals of partial discharges and voltage reference to obtain the parameters of frequency and phase shift. It has functions to use a voltage reference with variable frequency configured by user. The system allows to transmit to a PC the captured raw signals for partial discharges and voltage reference. The control of the equipment is made from the PC through a USB 3.0 connection. The MS Pico measurement equipment is designed to make measurements quickly and easily, making it an excellent tool for both periodic maintenance and acceptance tests.

Features:

- Removes electrical noise without sacrificing signal band,

- Automatically determines partial discharges location,

- Differentiates each partial discharge producing source, and

- Assess the criticality of each defect in relation to the degradation of electrical insulation.

For more information, please see our website here: https://www.ampacimon.com/en/other-pd-measurement-systems

Get in touch to find out more: https://www.ampacimon.com/en/contact

The partial discharge measuring equipment MS Plus is capable to do the capture of partial discharge signals and voltage reference signals.It has functions to configure the armed with synchronization, or by optical fiber synchronization input signal or by forced internal synchronization. The system allows to transmit to the central control PC (CAS) the RAW captured signals of the discharges and the voltage reference.

This system can be controlled from the PC by means of an Ethernet network connection through any of the three available ports (1 electric and 2 optic).

The MS Plus is designed to operate in a dedicated network with an available bandwidth of 100Mbps. It can be installed in series with other MS Plus to make a monitoring with multiple measuring points.

Features:

- Removes electrical noise without sacrificing signal band,

- Automatically determines partial discharges location,

- Differentiates each partial discharge producing source, and

- Assess the criticality of each defect in relation to the degradation of electrical insulation.

For more information, please see our website here: https://www.ampacimon.com/en/other-pd-measurement-systems

Get in touch to find out more: https://www.ampacimon.com/en/contact

ADR Sense is a self-powered sensor with vibration-based metrology for direct measurement of conductor sag, windspeed and mean conductor temperature

ADR Sense uses three seismic grade accelerometers to measure low frequency vibrations of the transmission line to determine line sag/clearance, perpendicular wind speed, and mean conductor temperature. The vibration metrology never requires calibration and remains accurate regardless of conductor height or environmental conditions such as rain, snow, dust, and heavy winds.

With the addition of an optional embedded tension sensor, ADR Sense can also measure ice accretion weight and conductor health metrics such creep, galloping, and remaining useful life.

Features:

- Self-powered through line induction.

- Measures sag, mean conductor temperature, line current, and the real wind speed directly impacting the line.

- Operates at any conductor height

- Operates on transmission lines up to 800 kV

- Fully Weatherproof

- Can be conveniently mounted close to the tower

- Completely maintenance and calibration-free

- SCADA/EMS integration through standard protocols IEC-104, DNP3, TASE2, or IEC61850

For more information, please see our website here:  https://www.ampacimon.com/en/adr-sense

Get in touch to find out more: https://www.ampacimon.com/en/contact

ADR Sense-D is a self-powered sensor with vibration-based metrology for direct measurement of conductor sag, windspeed and mean conductor temperature.

ADR Sense-D packs the same internal components as our transmission sensor (ADR Sense) into a smaller package for use on lower voltage lines up to 130 kV. The ADR Sense-D uses three seismic grade accelerometers to measure low frequency vibrations of the transmission or distribution line to determine line sag/clearance, perpendicular wind speed, and mean conductor temperature. The vibration metrology never requires calibration and remains accurate regardless of conductor height or environmental conditions such as rain, snow, dust, and heavy winds.

With the addition of an optional embedded tension sensor, ADR Sense can also measure ice accretion weight and conductor health metrics such creep, galloping, and remaining useful life.

Features:

- Self-powered through line induction.

- Measures sag, mean conductor temperature, line current, and the real wind speed directly impacting the line.

- Operates at any conductor height

- Operates on transmission lines up to 130 kV

- Fully Weatherproof

- Can be conveniently mounted close to the tower

- SCADA/EMS integration through standard protocols IEC-104, DNP3, TASE2, or IEC61850

For more information, please see our website here:  https://www.ampacimon.com/en/adr-sense

Get in touch to find out more: https://www.ampacimon.com/en/contact