Fully Involved Leatherworks

Troutman,  NC 
United States
http://www.Fullyinvolvedleatherworks.com
  • Booth: 1131


The official leather equipment of JobTown USA.

Firefighter owned and operated, we have been in business since 2013 and produced over 50,000 leather radio straps, fire helmet chin straps, firefighter glove straps, leather belts, and other Emergency Service Leather products. Can you find anyone else out there with reviews like ours? 4-Weeks to Your First Due:
Our 4 week guarantee that your custom products will be made and shipped.

Brands: Fully Involved Leatherworks, Radio Strap, Chin Strap, Helmet Front, Helmet Shield, Leather Suspenders, Radio holders, EMT accessories, Made in the USA for Firefighters by Firefighters.


 Products

  • Stitched Leather Fire Helmet Chin Strap
    5/8” wide 9/10 oz. leather
    Stitched edges
    29” overall length when extended
    The same postman slide used by your helmet manufacturer for quick adjustment of your helmet.
    Oversized Side Squeeze connection buckle for quick release with a gloved hand....


  • Stitched Leather Fire Helmet Chin Strap-

    Fully Involved Leatherworks Custom First Responder Gear is handmade with a limited lifetime warranty for Firefighters and Medics. Our 5/8” wide leather chin straps exceed what you normally get from the other guys. They are made from 9/10 oz American Zebu Hides. These hides are brought to our shop and then hand cut. Each piece of leather for our straps are hand dyed using Oil Dye. This Oil dye will not come off, and helps ensure that your product will not crack, fade, or lose color over time. Thick enough to take the abuse from the job of fire and EMS, but supple enough to be comfortable. Our handcrafted products feature stitched edges, tough hardware, limited lifetime warranty, and the best customer service in the industry. Each product is sealed to prevent bleeding onto uniforms and the ability to be washable for decon. Being a Firefighter Owned and Operated business, we test our products to the max before putting them on your back. Our products are made to last, and will ride with you through many years, if not your entire career.

    Product Description-

    • 5/8” wide 9/10 oz. leather
    • Stitched edges
    • 29” overall length when extended
    • NFPA Approved postman slide buckle for quick tightening and loosening of your helmet
    • Oversized Side Squeeze connection buckle for quick helmet release with a gloved hand
    • Add Trial-Sized Loc-Tite to screws to ensure they won’t come out over time.

    Color Choices Include-

    • Black Leather, Red Stitching, and Nickel Hardware
    • Black Leather, Black Stitching, and Black Hardware
    • Rustic Brown Leather, White Stitching, and Brass Hardware
    • Rustic Brown Leather, Black Stitching, and Black Hardware
    • Red Leather, Black Stitching, and Brass Hardware
    • Pink Leather, Black Stitching, and Nickel Hardware
    • Blue Leather, Black Stitching, and Nickel Hardware
    • Green Leather, Black Stitching, and Nickel Hardware
    • Tailboard Tan Leather, Black Stitching, and Nickel Hardware

    Helmet Options-

    • Attaches to Cairns N6A, Cairns N5A, OR Phenix TL2 with no adapters
    • Can attach to other helmet options with the removal of a screw and installation of adapter

    In Stock Products ship same or next business day.

    Post Fire Decontamination Recommendations

    All of our leather products are sealed to prevent the absorption of large contaminants and particulates. If your equipment enters the IDLH we recommend washing off the large particulates with copious amounts of water and a soft bristle brush. For a more in depth decontamination use a mild detergent (Joy, Dawn, or car soap) along with water and a soft bristle brush. Once clean let air dry out of direct sunlight. Our equipment should not be placed in an extractor or dryer. These recommendations are based off of UL Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures. The study may be found at https://ulfirefightersafety.org/docs/FentEtAl_JOEH2017.pdf

  • Rustic Brown Custom Handmade Leather Radio Strap w
    Fully Involved Leatherworks Custom Gear is handmade with a limited lifetime warranty. While many others continue to hand paint their text and logos, we no longer paint any products, since paint will not last....

  • Custom Radio Strap Combo-

    Fully Involved Leatherworks Custom First Responder Gear is handmade with a limited lifetime warranty for Firefighters and Medics. Our 1 ½” wide leather radio straps are made from 9/10 oz American Zebu Hides. These hides are brought to our shop and then hand cut. Each piece of leather for our straps are hand dyed using Oil Dye. This Oil dye will not come off, and helps ensure that your product will not crack, fade, or lose color over time. While many other competitors continue to hand paint their text and logos, we no longer paint any products, since paint will wear off, scratch off, and fade. Thick enough to take the abuse from the job of fire and EMS, but supple enough to be comfortable. Our handcrafted products feature hand stamping, stitched strap edges, custom logos, tough hardware, limited lifetime warranty, and the best customer service in the industry. Each product is sealed to prevent bleeding onto uniforms and the ability to be washable for decon. Being a Firefighter Owned and Operated business, we test our products to the max before putting them on your back. Our products are made to last, and will ride with you through many years, if not your entire career.

    PLEASE MEASURE YOURSELF BEFORE ORDERING. OUR SIZES DIFFER FROM ANY OTHER COMPANY. REPAIRS CAN NOT BE MADE.

    Sizing-

    From bottom of strap excluding case.

    • Extra Small 53-60 inches
    • Small 58-65 inches
    • Medium 64-71 inches
    • Large 70-75 inches

    If ordering as a gift here are some recommendations for size, however, not always 100% correct.

    • Extra Small 5'8" or less than 150 lbs.
    • Small - under 5'10" or less than 200 lbs.
    • Medium - under 6'3" or less than 260 lbs.
    • Large - over 6'3" or more than 325 lbs.

    How to Measure-

    Take a piece of webbing, rope, or string over your shoulder. Bring two ends together at your hip where you would like the strap to attach to the radio case. Take a tape measure and record the overall length in inches. Select the appropriate size from our sizing chart. For best results please ensure you are standing straight when taking the measurements.

    AVERAGE LEAD TIME ON ALL CUSTOM MADE PRODUCTS IS 3-4 WEEKS. LEAD TIMES ARE ESTIMATED AND NOT GUARANTEED. WE DO NOT FORECAST SHIP DATES SINCE EACH PRODUCT IS CUSTOM. ONCE YOUR PRODUCT IS UNDER CONSTRUCTION, YOU WILL BE NOTIFIED BY EMAIL. ONCE YOUR PRODUCT HAS SHIPPED, YOU WILL RECEIVE THE TRACKING INFORMATION. While we try our best to fulfill each order within the 3-4 week window sometimes back ordered materials can hold us up. Lead times are not guaranteed, except orders placed before the Christmas Deadline posted before the Holiday Season.

    Product Description-

    • 1 ½” Hand Cut American Full Grain Leather
    • Stitched strap edges (your color choice)
    • Top quality scissor buckles to attach to a radio case (your material choice)
    • 1 belt end keeper
    • 2 horizontal mic clips
    • 1 Mic clip with cord keeper included
    • Anti-sway strap (matching hardware)
    • Our Universal Radio case may be added with matching hardware and leather. It fits 99% of current radios on the market including but not limited to: Motorola APX series, Motorola HT series, Motorola CP series, Motorola DTR, EF Johnson, ICOM, VERTEX, Viking Radios, King Radios, and many more.

    WE DO NOT RECOMMEND WEARING YOUR RADIO STRAP OVER YOUR TURNOUT COAT. THIS CREATES AN ENTANGLEMENT HAZARD AND IS HARSH ON YOUR RADIO AND STRAP.

    For proper use with turnout gear place your coat over the strap with your radio hanging over bunker pants. Your strap should be placed where your coat will shed water off of your radio, but yet you can still use knob functions. Pull the collar mic out of your coat through the neck. By doing this you will protect your strap and most importantly your communication device.

    Post Fire Decontamination Recommendations

    All of our leather products are sealed to prevent the absorption of large contaminants and particulates. If your equipment enters the IDLH we recommend washing off the large particulates with copious amounts of water and a soft bristle brush. For a more in depth decontamination use a mild detergent (Joy, Dawn, or car soap) along with water and a soft bristle brush. Once clean let air dry out of direct sunlight. Our equipment should not be placed in an extractor or dryer. These recommendations are based off of UL Contamination of firefighter personal protective equipment and skin and the effectiveness of decontamination procedures. The study may be found at https://ulfirefightersafety.org/docs/FentEtAl_JOEH2017.pdf

  • "FIL" Firefighter Custom Leather Fire Helmet Shiel
    Fully Involved Leatherworks Handmade Leather Fire Helmet Shield Fronts are made with strong and durable leather that still has a supple feel. Our products are made to last, and will ride with you through many years; if not your entire firefighter career....


  • FIL Custom Leather Shield Front-
    Fully Involved Leatherworks Handmade Leather Fire Helmet Shield Fronts are made with strong and durable leather that still has a supple feel. Our products are made to last, and will ride with you through many years; if not your entire firefighter career. Our Leather Fronts are handmade from 13+ oz. saddle grade American Leather, well above industry standard.

    Product Description-
    Our hand carved design can be customized to your liking. Our shields are 6 1/2" tall, which will fit on any traditional style helmet including composite and leather helmets. They are wide enough to fit on the Phoenix TL-2 as well.

    Our designs are carved, tooled, hand painted, and sewn with real stitching, and then sealed with a water resistant clear finish for a professional look and durability. Proofs will not be sent after ordering.




     


Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


For questions regarding the conference program, please contact:

Ginger Mendolia
Conference Coordinator
Direct:  973-251-5051
Ginger.Mendolia@clarionevents.com

This site is best viewed in:

Chrome - 55.0 and higher
IE - 10.0 or higher
Firefox - 50.00 and higher
Safari - 5.0 and higher

For Technical Support with this webpage, please contact support.