FSI North America Tm

FSI North America® proudly offers a complete range of exceptionally high quality, high value, White Water/River Boat and Transom, Center Console Transom, and Fiberglass Hull Center Console Transom Inflatable Rescue Boats. All seams are hand sealed using exceptional craftsmanship and strengthened via the use of four layers of bonded fabric essentially creating a ‘quadruple overlapped glued seam.’ The resulting Boats are extremely rugged and durable in addition to being highly UV/Chemical/Ozone and Abrasion resistant. High quality combined with superior handling and maneuverability allow the rescuer to focus solely ‘on the job at hand.’

 Features:

Sectional floor boards with aluminum floorboards as standard. The F-YRR330.365.385 may also be equipped, if so ordered, with 75mm thick (when inflated) air inflatable floors and keel complete with low pressure inflation deflation valves only (inflate to a max. of 10psi).

Transom-all for short shaft engines—7/8” thick x 15” L marine grade plywood, with aluminum ‘in pad’ and ‘out pad’ installed, 3 self bailing drain plugs, and HIN name plates to US Coast Guard standards. Specify optional approx. 21” H transom # F-LST for use with long shaft/jet drive motors.

All styles have multiple inflation/deflation low and high pressure air fill valves and pressure relief valves. Inflatable in mere minutes (In seconds if compressed air fill is utilized using available optional high pressure air fill hose and universal SCBA adapter). Approx. 3.75 psi internal air pressure.

All styles have Rubbing Strakes - 4.3” black or red colored, on the boat bottom, around the boat and on keel (transom style only).

All styles have lifting handles (9.8” X 3.9”) on both sides, towing rings, bow and transom 1.9” Stainless D-rings for sling lift.

All styles are available in multiple colors - Standard colors for 1100 dtex boats are red. Also offered on demand as standard are yellow, gray, black and blue. 1800 dtex boats and smaller F-YRR330/365/385 are available in red, black, and dark grey. Specific color when ordering.

Includes 1 wooden seat (standard), single use carry sleeve/bag (Transom Boats offer 1 boat and 1 floor carry sleeve/bag), 2 oars/paddles, 1 foot pump, 1 repair kit (swatches of repair fabric/glue kit), lifeline and 13’ (8mm dia.) towing rope. Transom boats come with gas can strap/cover, stainless steel bow handle, bow towing ring, water splash guard and side pouches for equipment storage. Boats as standard do not include optional high pressure air fill hose # P-FH and universal SCBA adapter # F-SCBAF-H that may only be used with # P-FH.

The DAT®3030S comes equipped as standard equipment with an integrally attached ground floor that will hold up to 200 gallons of water (with an 8”/20 cm berm approx.) before requiring pump out, 2 roll up windows – one on each side, 2 skylights, full closure slip in and out dirty entry/clean exit doors, eight 19”/48 cm dia HVAC/clothes inlet/outlets with tie closures – 2 each on each end/side, 1 small electrical duct, 1 center divider curtain, 2 (two) ½ cross divider curtains, 1 ea. high pressure and low pressure inflation deflation valve, one air inflation hose w. safety cord, 1 pressure relief valve, 4 metal stakes, hammer and ground anchor points, tie down ropes and 4 D-rings to tie off to, repair kit, manual, shelter sleeve, 2 upper air vents. All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI® shelter. Simply inflate the unit - plug into a water supply and commence decon in 1 – 2 minutes.

The DAT®3030S also comes complete with a with a qty. of 12 spray nozzle heads and qty. of 4 (four) 5’/1.5 M lengths of coiled ½”/13 mm hose with attached multiple function spray guns with shutoffs and quick disconnects offering spray patterns and flows meant to gently yet thoroughly drench and decon victims. Flows per shower head and per spray gun = approx. 1 gpm/4 lpm optimum and dependent on water volumes available.

The DAT®3030S is a 2 (two) line system designed to handle 2 non-ambulatory personnel on stretchers with attendants working on either side of the victim inside the unit, or the DAT3030S can handle 1 non-ambulatory and two ambulatory, or 4 ambulatory personnel at any one time.

DAT®3030S Approx. 10’ W X 10’ L X 9’ H (3.05 X 3.05 X 2.73 M), Approx. 100 sq. Ft. (9.3M²) 139 lbs. (63 Kg) Carton size approx. = 131 X 108 X 68 cm (52” L X 43” W X 27” H) As an option -- one can double the capacity if required. Simply inflate the unit and plug into a water supply - unit is offered with 2 3/4" (19mm) GHT threaded inlet hose– other fittings available as specified. Comes complete with electric inflator/deflator, and high pressure scba fitting. Unit supplied w. no charge redundant features allowing for - hanging undress/redress kits etc. on the inlet and outlet side and - doubling of showering capability in the future.